Curtain Installation in Hyderabad: Rods, Tracks and Fitting

Curtain rods and tracks fitted level, at the right height and into the right fixings for your wall or ceiling. Our curtains, or curtains and hardware you already have.

  • 5.0 on Google
  • Doorstep across Hyderabad
  • 8 AM to 10 PM, all 7 days
White pinch pleat sheer curtain hanging from rings on a chrome curtain rod
  • Same-day reply, and a same-day home visit on request
  • Fixings chosen for the material: RCC, brick, AAC block or gypsum false ceiling
  • Height and width planned so curtains clear the floor and stack clear of the glass
  • Install-only jobs for rods, tracks or ready-made curtains you already own
  • Extra support brackets on long runs so rods and tracks don't sag
  • Drilling scheduled within your gated community's permitted work hours

A good curtain on a badly fitted rod still looks wrong. It sags in the middle, it doesn’t clear the floor evenly, or one bracket pulls out of the wall six months later. Installation is the half of curtains in Hyderabad that people think about least, and it’s where most of the complaints we’re called to fix start. If you’re still choosing hardware, our complete curtains buying guide covers it alongside fabrics and linings.

What our curtain installation covers

Most of our installations are part of a full project: we measure, stitch the curtains, supply the hardware and fit it. We also do these as standalone jobs:

  • Install-only: rods, tracks or ready-made curtains you’ve already bought, online or from a shop
  • New hardware for existing curtains: replacing an old rod with a ceiling track, or adding a second track for sheers
  • Moving hardware: shifting a rod higher, wider, or from the wall to the ceiling
  • Motorised tracks: fitted to the ceiling or into a false-ceiling pocket

If you’ve bought the hardware yourself, we’ll check it before drilling. Many online rods are thin telescopic tubes that bend over a wide window, and track kits sometimes come with too few brackets for the length.

Want this measured for your windows? We visit with samples, free across Hyderabad. WhatsApp +91 98499 17494.

Rods, wall tracks, ceiling tracks and false-ceiling pockets

HardwareWhere it fixesBest withStrengthsWatch out for
Curtain rodWall, above the frameEyelet, ring-top, tab-top curtainsDecorative, simple, easy to swap curtainsLight leaks at top; centre sags on long runs without a middle bracket
Wall trackWall, above the framePinch pleat, pencil pleatSlim, carries heavier lined curtainsVisible on the wall; needs a pelmet to hide it
Ceiling trackRCC ceiling or slabPinch pleat, ripple fold, sheersCurtains fall from the ceiling line; double tracks fit side by sideNeeds accurate levelling; check for conduits in the slab
False-ceiling pocketRecess in the false ceiling, track fixed insideRipple fold, motorised tracksHardware disappears; neatest finishMust be planned before the ceiling is finished

Our curtain rods and tracks guide goes through each type in more detail, and our guide on how high to hang curtains covers the height question.

What is your wall or ceiling made of?

This decides the drill, the plug and how much load each fixing can take. We check before drilling, not after a plug spins in the hole.

RCC ceilings and columns. Hard and strong. Holes need a hammer drill and nylon plugs sized to the screw. Ceiling slabs often carry electrical conduits for lights and fans, so we check switch positions and light points before choosing where to drill.

Brick walls. Older independent houses and many apartments have brick walls. Plugs hold well in solid brick but poorly in the mortar joint, so we shift a bracket a little if a hole lands in the joint.

AAC block walls. Many newer towers use autoclaved aerated concrete blocks. AAC is soft, so an ordinary plug has nothing to grip. We use plugs made for aerated concrete; fixing makers like fischer list curtain rails among the uses for their aerated concrete plug and specify rotary drilling only, without hammer action, so the hole isn’t oversized.

Gypsum false ceilings. The board is not a fixing surface for a loaded track. We screw into the metal framing above it, into a wooden or plywood batten fixed in during the ceiling work, or down to the slab. If your false ceiling isn’t built yet, ask your contractor for a curtain pocket or batten along the window wall now.

Four cross-section drawings showing a curtain bracket fixed into an RCC slab with a nylon plug, into solid brick away from the mortar joint, into an AAC block with a long aerated concrete plug, and through a gypsum false ceiling into a batten above the board
The fixing has to suit the material behind the paint. Gypsum board alone should never carry a loaded curtain track.

Getting height and width right

We fit the rod or track well above the window, often close to the ceiling, and wide enough that the curtains stack beside the glass rather than over it. That makes the window look bigger and lets in more light when the curtains are open. On sliding balcony doors, common in Hyderabad high-rises, we check the curtain will clear the door handle and won’t catch in the sliding track.

High floors in areas like Kokapet and the Financial District get strong wind through open balcony doors. We fit end stops firmly and suggest weighted hems so curtains don’t whip against the glass. If your curtains still need making, our curtain stitching service adds the weights as standard.

Motorised curtain track fitting

Motorised tracks are fixed like ceiling tracks but need a power point near one end and very accurate levelling, or the motor strains. The best time to plan one is before the false ceiling and painting are done, so the wire stays hidden. See our motorized curtains and blinds service for the systems we fit.

Drilling in gated communities

Many gated communities have rules on when drilling is allowed, and some need advance permission or a gate pass for workers. Tell us the rules when you book and we’ll plan the drilling within them. We clean the drilling dust before leaving, which matters in flats where the move-in deep clean is already done.

How long does curtain installation take?

Fitting is usually done within 2 days of the visit, and at most a week for larger jobs, depending on the number of windows, the ceiling type and whether curtains are being stitched as well.

What decides the cost of curtain installation?

  • Number of windows and length of each run
  • Hardware type: rod, wall track, ceiling track, double track or motorised
  • Surface: RCC, brick, AAC or false ceiling with framing to find
  • Whether we’re supplying hardware or fitting yours
  • Removing old hardware and filling old holes

You get a fixed, itemised quote after the free home visit.

Curtain installation across Hyderabad

We fit curtain rods and tracks across the city, from new towers in Kokapet and the Financial District to older homes in Secunderabad.

WhatsApp +91 98499 17494 with a photo of the window and the hardware you have, or book a free home visit and we’ll check your walls and ceilings before planning the fit.

How it works

  1. Check the window and the surface We look at the window, ceiling height, false ceiling if any, AC units and switches, and work out what the wall or ceiling is made of before deciding where to drill.
  2. Agree the hardware Rod, wall track, ceiling track, double track or motorised. If you've bought the hardware already, we check it's strong enough for the width and curtain weight.
  3. Mark level and at the right height We mark the line with a level, not off the window frame, since frames in many flats aren't perfectly straight. The width runs past the frame so curtains stack clear of the glass.
  4. Drill and fix Holes are drilled with the right method and plug for the material. In false ceilings we fix into the framing or a batten, never just the board.
  5. Hang, test and clean up We hang the curtains, run them open and closed several times, adjust gliders and stops, and vacuum the drilling dust before we leave.

Frequently asked questions

Do you install curtain rods and tracks I bought myself?

Yes, Baaft Decor takes install-only jobs for curtain rods, tracks and ready-made curtains customers have bought elsewhere, including online orders. Before drilling we check the hardware is strong enough for the window width and the curtain weight, and that it came with enough brackets. Thin telescopic rods often sag over wide windows, so we may suggest an extra support bracket. Most of our work is still full projects where we supply the curtains and hardware, but fitting what you already have is a job we're happy to do.

Is a curtain rod or a curtain track better?

Neither is better everywhere. A curtain rod is a visible pole with finials that suits eyelet and ring-top curtains and looks decorative over a single window. A curtain track is a slim rail with gliders that can be fixed to the wall or ceiling, bend around bay windows, and carry pinch pleat or ripple fold curtains. Tracks also allow double layers and motorisation. For floor-to-ceiling glass and false ceilings in modern Hyderabad flats, ceiling tracks are usually the cleaner and more practical choice.

Can curtain tracks be fixed to a gypsum false ceiling?

Curtain tracks can be fitted to a gypsum false ceiling, but not into the gypsum board alone. The board is not meant to carry the pull of a loaded curtain track, and the screws can tear out over time. The track should be screwed into the metal framing above the board, into a wooden or plywood batten fixed in during the false-ceiling work, or hung from the concrete slab above. The neatest option is a curtain pocket, a recess in the false ceiling, planned before the ceiling is finished.

Why do curtain rods come loose from AAC block walls?

Curtain rods come loose from AAC block walls because AAC, autoclaved aerated concrete, is soft and full of air pockets. A standard plastic plug meant for brick or concrete expands into nothing and spins or pulls out when the curtain is drawn repeatedly. AAC needs plugs designed for aerated concrete, which grip the soft material along their length, and the hole should be drilled without hammer action so it isn't oversized. Many newer apartment towers in Hyderabad use AAC blocks for internal walls.

How high should a curtain rod be installed?

A curtain rod or track should usually be fitted well above the window frame, often close to the ceiling, rather than just over the frame. Hanging it higher makes the window look taller, lets floor-length curtains fall in one clean line, and reduces light leaking over the top. In rooms with a false ceiling, a ceiling-mounted track or curtain pocket is the simplest answer. The exact height also depends on the curtain length, pelmets, AC units and how close the window is to the ceiling.

Can you install curtains in a gated community with RWA rules?

Yes. Many gated communities in Hyderabad restrict drilling and other noisy work to set hours, and some ask for advance permission or a gate pass for workers. When you book, tell us your society's rules and we'll schedule the drilling within those hours and bring what the security desk needs. We work 8 AM to 10 PM on all seven days, so quieter tasks like hanging and dressing curtains can happen outside the drilling window.

Can you fit motorised curtain tracks?

Yes, we fit motorised curtain tracks as well as manual ones. A motorised track needs a power point close to one end of the track, ideally planned before the false ceiling or wall finishing is done, so the wire can be hidden. The track is fixed the same way as a manual ceiling track but has to be perfectly level and well supported so the motor runs smoothly. We can also replace an existing manual track with a motorised one if the ceiling allows it.

Get a quote for curtain installation in hyderabad

Share a few details and we reply on WhatsApp, usually within the hour (8 AM to 10 PM).

  • Free measurement visit with samples
  • Fixed written quote before work starts
  • Rated 5.0 on Google

Prefer to talk? Call +91 98499 17494

Premium Quality

Curated fabrics from trusted suppliers

Design Consultation

Free expert advisory at your doorstep

Precise Measuring

Professional measurement for perfect fit

Expert Installation

Seamless fitting by trained professionals